English

产品中心

Testing Equipment
Engine Analyzer
Electric Meter
Other
Maintenance Tool
CPU Repairer
Other
Maintenance Material
Cable
Tool
Coil
Other

bentelan per sinusite

bentelan

cialis generico in farmacia senza ricetta

tadalafil generico quando link

lexapro pregnancy risk category

lexapro pregnancy reviews mikemaloney.net

 

 

 

QCET
Address: B Room, 9F, No. 8, Yinhua Rd., Zhuhai, China
Tel:+86-756-2162500 to 2162515 (16 lines)
Fax:+86-756-2162515
Email:qcetcn@hotmail.com
Post Code:519000

 

您当前的位置:首页 > 产品中心

Multi-function Automotive Circuit Tester

 

In the case without damaging the rubber can accurately measure the various fault lines .

Set the multimeter and test light gear , the gear can not do top multimeter functions , specifically measured poor contact and aging lines.

If space is small and light in some places is not strong , as usual detect various faults.

 

Advantages:

1, the product is a unique four-in products, with a multimeter , test light , lights , probe function.

2 , digital multimeter functions are all intelligent, after 30 seconds the backlight automatically turns off the backlight , all ranges are intelligent, stop using the instrument off automatically after 20 minutes .

3 , easy to use, quick detection , simple operation and reliable performance.

Get rid of old tools , adding new equipment, improve economic efficiency !

Voltage measurement gear

1, the first black pen alligator clip to ground , the knob switch to the voltage measurement stalls, live with the measured line probe hook to pull the trigger probe forward against the rubber wire is , if there are electrical wires Display Screen significantly depending on the nature of the wires in the exact voltage. ( Can measure OV ~ 60V DC voltage ) .

 

 

2 , click the function button switch (SELECT) will show the AC symbol (AC) can be measured from 0V ~ 380V AC voltage on the screen.

Electrical installation and decoration

Many are looking for decorating automotive electrical control line or signal line , with ordinary tools ( multimeter. Pilot lights ) must be Popi find, and convenient and easy to hurt the hand, just use this tool hooked wire to pull the trigger , you can not break leather case you need to accurately measure the control or signal lines , that is convenient and quick.

 

 

Multimeter voltage test lamp and gear

The gear is designed to detect bad or aging lines, before the test first alligator clip ground black pen , the rotary switch to the girl in the test light and multimeter voltage " " position , with the live test probe hook the rubber wires, then pull the trigger probe forward against the rubber wires, such as measuring the front is 12V nominal voltage wire , and then measuring the voltage wire backend " if less than 10V voltage LCD display ," said the back-end is bad or aging lines. Resistance measurement stalls

1, the rotary switch to the resistance gear, ride with the positive and negative leads across the resistor board can accurately measure the resistance group values.

2 , click the function button switch (SELECT), depending on the LCD screen will display the diode symbol pattern , you can measure a variety of secondary and tertiary tubes ... tubes .

3 , double-click function toggle key (SELECT), will display on the LCD screen , as a symbol Feng -ming pattern , can be measured by the positive and negative leads off .

 

 

Light-emitting diode (LED1) test lamp

1, the first black pen alligator clip to ground , the knob switch to the light-emitting diode (LED1) test lamp stalls, live with the probe measured the rubber wire hook to pull the trigger probe forward against the rubber wire , as the wire electric light emitting diode is about to be lit.

2, the test car line short circuit tests.

3 , ignition system testing. 4 , generator testing.

5 , the charging system test . 6, the sensor input and output signal test .

7 , the actuator signal test .

8 , especially for pulse test : injector , a vehicle speed sensor .

 

 

Test light gear

1, the first black pen alligator clip to ground , the knob switch to the test lamp stalls, live with the probe measured the rubber wire hook to pull the trigger probe forward against the rubber cord , if any 12V power within the test lamp wire and will light up.

2, the test car line short circuit .

在线订单

ru 486 abortion pill buy online

buy abortion pill

viagra prodej praha

viagra

cheap abortion pill

buy abortion pill uk

 

Address: B Room, 9F, No. 8, Yinhua Rd., Zhuhai, China

Tel: +86-0756-2162500 to 2162515 (16 lines)
Fax: +86-0756-2162515
Email:qcetcn@hotmail.com
CopyRight © 2013-2014 Zhuhai QCET
Visiter Counter: 1177055

粤公网安备 44040202000132号

 
客服